EV ELECTROVOICE V-2 VINTAGE RIBBON MICROPHONE W/YOKE & ATTACHED CABLE

Electro-Voice

$ 499.00 

Sorry, this item is out of stock

Share:
This vintage Electro-Voice V-2 ribbon microphone looks good and works perfectly
with yoke/swivel mount and attached cable with 1/4" phone jack, no case or manual
From the original manufacturer's description:
The velocity microphone, also known as the “pressure gradient” type, responds to the difference in instantaneous sound pressure on the front and back of the moving element. The velocity microphone has a bidirectional pick-up pattern and an inherently flat frequency response. It is a type of microphone widely used in studio broadcasting and recording.

Physical
Electro-Voice velocity microphones are based on proven design and are extremely durable. The frame and internal mounting structure is a single piece, high-pressure die casting. Jars and mechanical shock cannot cause shifting of parts. This is an exclusive feature of all Electro-Voice velocity microphones. The microphone cradle is steel reinforced. Knurled knobs at the sides permit locking the microphone firmly in any position.

Acoustical
The open housing virtually eliminates internal reflection and diffraction. This assures full utilization of the velocity microphone’s high fidelity characteristic. True reproduction without imposed peaks and dips is the result of an efficient magnetic circuit and the Acoustalloy® diaphragm which provides a smoother response over a wider frequency range. Proper coordination of ribbon fabrication, pole piece design, magnetic circuit placement and correct transformer coupling provide a high fidelity response characteristic. The frequency response curve is ideally adapted to voice and music reproduction.

It is an inherent characteristic of the ribbon velocity microphone that the output level is somewhat lower than that of a pressure microphone. Consequently, it is usually advisable to use the gain control on the amplifier in a correspondingly higher position. The velocity microphone retains its excellent frequency characteristic when used at distances of more than six inches from the sound source. When used at less than this distance, the microphone has a tendency to accentuate the low frequencies. This, however, may be desirable in certain instances… to compensate for associated equipment deficient in low frequencies or a voice that lacks depth, for example.

The bidirectional characteristic of the velocity gives equal pick-up at the front and back of the microphone, and zero pick-up at the sides, top, and bottom. For all practical purposes the frequency response remains constant at all angles. The null or zero pick-up at the sides gives the velocity microphone the following advantages:

    Pick-up is increased 1.7 times over that of the conventional pressure microphone for average conditions of reverberation, acoustic feedback and room noise. For public address applications this pick-up range may be increased considerably through proper placement of speakers so that direct and reflected sounds strike the microphone at the null points (sides, top or bottom).

    Random room noise and reverberation are reduced 5 dB.

    The microphone may be placed so as to almost completely eliminate unwanted sounds.

    Acoustic feedback can be further reduced by tilting the microphone to place the null sides in the direction of the interfering sounds.

    The microphone can be worked from both front and back simultaneously.

Applications
E-V velocity microphones are recommended for all types of music and voice reproduction… in public address, broadcasting and recording. Wide frequency response, high fidelity characteristics, wide-range front pick-up and pick-up range make these microphones ideal for solo or orchestra—for individual or chorus—for single speaker or groups. Very popular with singers and band leaders. Mounted in footlights or on overhead booms, they are used in reinforcing stage plays.

The Model V-2 offers a choice of one standard impedance: Hi-Z, 50, 200, 250, or 500 ohms (this mic is the Hi-Z version). Flat frequency response from 40 to 9,000 hertz. Output level is –62 dB.

Polar Pattern: Bidirectional voltage output proportional to cosine of angle of pick-up. For all practical purposes, the frequency response remains constant at all angles of pick-up.

Like us on Facebook!

Call us

Call 855-MIC-HAWK and talk to the Hawk!

Latest posts

  • Neumann U47, legendary early long body model, with case!

    Once in a blue moon do we get our hands on one of these, and this one has just been serviced by the famous Peter Drefahl in Germany. Perfect working condition, ready to give some lucky buyer decades of incredible... Read more →

  • 'Baby U47' from Funkwerk Leipzig, the CM7156, a classic East German vintage tube mic

    Our featured mic today is an extremely rare vintage East German handcrafted multipattern tube condenser mic, the Funkwerk Leipzig CM7156. You hardly ever see these, and when you do they hardly ever work. This one does, however. It's been carefully gone through... Read more →